Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.86Z
Area Angle
Energy per Electric Charge
Electric Potential
The Electric Potential is a scalar valued quantity associated with an electric field. The electric potential Φ(x) at a point, x, is formally defined as the line integral of the electric field taken along a path from x to the point at infinity. If the electric field is static, i.e. time independent, then the choice of the path is arbitrary; however if the electric field is time dependent, taking the integral along different paths will produce different results.
Φ
Electromotive Force
In physics, electromotive force, or most commonly emf (seldom capitalized), or (occasionally) electromotance is "that which tends to cause current (actual electrons and ions) to flow."[1]. More formally, emf is the external work expended per unit of charge to produce an electric potential difference across two open-circuited terminals.[2][3] The electric potential difference is created by separating positive and negative charges, thereby generating an electric field.[4][5] The created electrical potential difference drives current flow if a circuit is attached to the source of emf. When current flows, however, the voltage across the terminals of the source of emf is no longer the open-circuit value, due to voltage drops inside the device due to its internal resistance. [Wikipedia]
ℰ
Force
Friction
Friction is the force of two surfaces In contact, or the force of a medium acting on a moving object (i.e. air on an aircraft). When contacting surfaces move relative to each other, the friction between the two objects converts kinetic energy into thermal energy.
Thrust
Thrust is a reaction force described quantitatively by Newton's Second and Third Laws. When a system expels or accelerates mass in one direction the accelerated mass will cause a proportional but opposite force on that system.
1. The pushing or pulling force developed by an aircraft engine or a rocket engine.
2. The force exerted in any direction by a fluid jet or by a powered screw, as, the thrust of an antitorque rotor.
3. (symbol F). Specifically, in rocketry, F = mv where m is propellant mass flow and v is exhaust velocity relative to the vehicle. Also called momentum thrust.
Force is an influence that causes mass to accelerate. It may be experienced as a lift, a push, or a pull. Force is defined by Newton's Second Law as F = m · a, where F is force, m is mass and a is acceleration.
Net force is mathematically equal to the time rate of change of the momentum of the body on which it acts. Since momentum is a vector quantity (has both a magnitude and direction), force also is a vector quantity.
Power per Area
Radiant Emmitance
Irradiance and Radiant Emittance are radiometry terms for the power per unit area of electromagnetic radiation at a surface. "Irradiance" is used when the electromagnetic radiation is incident on the surface. "Radiant emmitance" (or "radiant exitance") is used when the radiation is emerging from the surface.
Heat Flow Rate per Unit Area
Irradiance
Irradiance and Radiant Emittance are radiometry terms for the power per unit area of electromagnetic radiation at a surface. "Irradiance" is used when the electromagnetic radiation is incident on the surface. "Radiant emmitance" (or "radiant exitance") is used when the radiation is emerging from the surface.
Radiosity
Radiosity is the total emitted and reflected radiation leaving a surface.
Electric Conductivity
Electric conductivity or specific conductance is a measure of a material's ability to conduct an electric current. When an electrical potential difference is placed across a conductor, its movable charges flow, giving rise to an electric current. The conductivity σ is defined as the ratio of the electric current density J to the electric field E:
J = σE
In isotropic materials, conductivity is scalar-valued, however in general, conductivity is a tensor-valued quantity.
σ
Heat
Thermal Energy
Enthalpy
Static enthalpy per unit mass. The specific enthalpy of a working mass is a property of that mass used in thermodynamics, defined as h=u+p . v where u is the specific internal energy, p is the pressure, and v is specific volume. In other words, h = H / m where m is the mass of the system. The SI unit for specific enthalpy is joules per kilogram. [Wikipedia]
Radiant Energy
Radiant Energy is the energy of electromagnetic waves. The quantity of radiant energy may be calculated by integrating radiant flux (or power) with respect to time
Energy and Work
Potential Energy
Energy possessed by a body by virtue of its position in a gravity field in contrast with kinetic energy, that possessed by virtue of its motion.
Kinetic Energy
The energy which a body possesses as a consequence of its motion, defined as one-half the product of its mass m and the square of its speed v, 1/2 mv^2. The kinetic energy per unit volume of a fluid parcel is the 1/2 p v2 , where p is the density and v the speed of the parcel. See potential energy.
For relativistic speeds the kinetic energy is given by
Ek = mc^2 - m0c^2
where c is the velocity of light in a vacuum, m0 is the rest mass, and m is the moving mass.
Internal Energy
Kinetic Energy
Energy transferred by a thermal process. Heat can be measured in terms of the dynamical units of energy, as the erg, joule, etc., or in terms of the amount of energy required to produce a definite thermal change in some substance, as, for example, the energy required per degree to raise the temperature of a unit mass of water at some temperature ( calorie, Btu).
Liquid Volume
First Moment of Area
The first moment of area is the summation of area times distance to an axis. It is a measure of the distribution of the area of a shape in relationship to an axis.
The volume of a solid object is the three-dimensional concept of how much space it occupies, often quantified numerically. One-dimensional figures (such as lines) and two-dimensional shapes (such as squares) are assigned zero volume in the three-dimensional space.
Volume
Dry Volume
Molar Angular Momentum
Amount of substance per unit mass
Concentration
Amount of Substance Per Unit Volume
Serum or Plasma Level
Length Temperature Time
Angular Momentum
Momentum
Linear Momentum
Linear momentum is the product of mass and linear velocity. The SI unit for linear momentum is meter-kilogram per second (m-kg/s).
Quantity of motion. Linear momentum is the quantity obtained by multiplying the mass of a body by its linear speed. Angular momentum is the quantity obtained by multiplying the moment of inertia of a body by its angular speed.
The momentum of a system of particles is given by the sum of the momentums of the individual particles which make up the system or by the product of the total mass of the system and the velocity of the center of gravity of the system.
The momentum of a continuous medium is given by the integral of the velocity over the mass of the medium or by the product of the total mass of the medium and the velocity of the center of gravity of the medium.
Quantity of rotational motion.
Linear momentum is the quantity obtained by multiplying the mass of a body by its linear velocity. Angular momentum is the quantity obtained by multiplying the moment of inertia of a body by its angular velocity. The momentum of a system of particles is given by the sum of the momenta of the individual particles which make up the system or by the product of the total mass of the system and the velocity of the center of gravity of the system. The momentum of a continuous medium is given by the integral of the velocity over the mass of the medium or by the product of the total mass of the medium and the velocity of the center of gravity of the medium.
In physics, the angular momentum of an object rotating about some reference point is the measure of the extent to which the object will continue to rotate about that point unless acted upon by an external torque. In particular, if a point mass rotates about an axis, then the angular momentum with respect to a point on the axis is related to the mass of the object, the velocity and the distance of the mass to the axis. While the motion associated with linear momentum has no absolute frame of reference, the rotation associated with angular momentum is sometimes spoken of as being measured relative to the fixed stars.
Microbial Formation
Thrust to Mass Ratio
Specific Heat Pressure
Specific heat at a constant pressure.
Area Thermal Expansion
When the temperature of a substance changes, the energy that is stored in the intermolecular bonds between atoms changes. When the stored energy increases, so does the length of the molecular bonds. As a result, solids typically expand in response to heating and contract on cooling; this dimensional response to temperature change is expressed by its coefficient of thermal expansion.
Different coefficients of thermal expansion can be defined for a substance depending on whether the expansion is measured by:
* linear thermal expansion
* area thermal expansion
* volumetric thermal expansion
These characteristics are closely related. The volumetric thermal expansion coefficient can be defined for both liquids and solids. The linear thermal expansion can only be defined for solids, and is common in engineering applications.
Some substances expand when cooled, such as freezing water, so they have negative thermal expansion coefficients. [Wikipedia]
Area Temperature
Specific Heat Capacity
Angular Frequency
Frequency
Stochastic Process
Activity
Activity is the term used to characterise the number of nuclei which disintegrate in a radioactive substance per unit time. Activity is usually measured in Becquerels (Bq), where 1 Bq is 1 disintegration per second.
Frequency is the number of occurrences of a repeating event per unit time. The repetition of the events may be periodic (i.e. the length of time between event repetitions is fixed) or aperiodic (i.e. the length of time between event repetitions varies). Therefore, we distinguish between periodic and aperiodic frequencies. In the SI system, periodic frequency is measured in hertz (Hz) or multiples of hertz, while aperiodic frequency is measured in becquerel (Bq).
Angular frequency is a scalar measure of rotation rate. It is the magnitude of the vector quantity angular velocity.
ω
Luminous Flux
Luminous Flux or Luminous Power is the measure of the perceived power of light. It differs from radiant flux, the measure of the total power of light emitted, in that luminous flux is adjusted to reflect the varying sensitivity of the human eye to different wavelengths of light.
F
Permeability
Permeability is the degree of magnetization of a material that responds linearly to an applied magnetic field. In general permeability is a tensor-valued quantity.
μ
Luminous Flux per Area
Luminous Emmitance
Luminous Emittance is the luminous flux per unit area emitted from a surface.
Illuminance
Illuminance is the total luminous flux incident on a surface, per unit area. It is a measure of the intensity of the incident light, wavelength-weighted by the luminosity function to correlate with human brightness perception.
Energy Density
Strain Energy Density
u
Energy density is defined as energy per unit volume. The SI unit for energy density is the joule per cubic meter.
Magnetic Flux
Magnetic Flux is the product of the average magnetic field times the perpendicular area that it penetrates.
Φ
Thermal Insulance
Moment of Inertia
Velocity
Angular Velocity
Vorticity
In the simplest sense, vorticity is the tendency for elements of a fluid to "spin." More formally, vorticity can be related to the amount of "circulation" or "rotation" (or more strictly, the local angular rate of rotation) in a fluid. The average vorticity in a small region of fluid flow is equal to the circulation C around the boundary of the small region, divided by the area A of the small region. Mathematically, vorticity is a vector field and is defined as the curl of the velocity field.
ω
The change of angle per unit time; specifically, in celestial mechanics, the change in angle of the radius vector per unit time.
Linear Velocity
Specific Impulse by Mass
Time Squared
Thermodynamic Entropy
Energy per Temperature
Heat Capacity
Cp
Thermodynamic Entropy is a measure of the unavailability of a system’s energy to do work.
It is a measure of the randomness of molecules in a system and is central to the second law of thermodynamics and the fundamental thermodynamic relation, which deal with physical processes and whether they occur spontaneously. Spontaneous changes, in isolated systems, occur with an increase in entropy. Spontaneous changes tend to smooth out differences in temperature, pressure, density, and chemical potential that may exist in a system, and entropy is thus a measure of how far this smoothing-out process has progressed.
It can be seen that the dimensions of entropy are energy divided by temperature, which is the same as the dimensions of Boltzmann's constant (kB) and heat capacity. The SI unit of entropy is joule per kelvin. [Wikipedia]
Force per Electric Charge
Mass per Time
Thermal Energy Length
Electric Current per Unit Energy
Area Angle
Torque
In physics, a torque (τ) is a vector that measures the tendency of a force to rotate an object about some axis [1]. The magnitude of a torque is defined as force times its lever arm [2]. Just as a force is a push or a pull, a torque can be thought of as a twist.
The SI unit for torque is newton meters (N m). In U.S. customary units, it is measured in foot pounds (ft lbf) (also known as 'pounds feet').
Mathematically, the torque on a particle (which has the position r in some reference frame) can be defined as the cross product:
τ = r x F
where
r is the particle's position vector relative to the fulcrum
F is the force acting on the particles,
or, more generally, torque can be defined as the rate of change of angular momentum,
τ = dL/dt
where
L is the angular momentum vector
t stands for time. [Wikipedia]
Length Mass
Molecular Mass
Mass
M
The molecular mass, or molecular weight of a chemical compound is the mass of one molecule of that compound, relative to the unified atomic mass unit, u. Molecular mass should not be confused with molar mass, which is the mass of one mole of a substance.
M
Area
Area is a quantity expressing the two-dimensional size of a defined part of a surface, typically a region bounded by a closed curve.
Inductance
Inductance is an electromagentic quantity that characterizes a circuit's resistance to any change of electric current; a change in the electric current through induces an opposing electromotive force (EMF). Quantitatively, inductance is proportional to the magnetic flux per unit of electric current.
L
Dynamic Pressure
Dynamic Pressure (indicated with q, or Q, and sometimes called velocity pressure) is the quantity defined by:
q = 1/2 * ρv^2
where (using SI units):
q = dynamic pressure in pascals
ρ = fluid density in kg/m3 (e.g. density of air)
v = fluid velocity in m/s
q
Pressure is an effect which occurs when a force is applied on a surface. Pressure is the amount of force acting on a unit area. Pressure is distinct from stress, as the former is the ratio of the component of force normal to a surface to the surface area. Stress is a tensor that relates the vector force to the vector area.
Atmospheric Pressure
The pressure exerted at a point due to the presence of an atmosphere. In most circumstances atmospheric pressure is closely approximated by the hydrostatic pressure caused by the weight of air above the measurement point. Low pressure areas have less atmospheric mass above their location, whereas high pressure areas have more atmospheric mass above their location. Similarly, as elevation increases there is less overlying atmospheric mass, so that pressure decreases with increasing elevation. [Wikipedia]
Pressure
Total Pressure
The total pressure is the sum of the dynamic and static pressures, i.e. P_0 = P + q.
P_0
Force Per Area
Stress
Stress is a measure of the average amount of force exerted per unit area of a surface within a deformable body on which internal forces act. In other words, it is a measure of the intensity or internal distribution of the total internal forces acting within a deformable body across imaginary surfaces. These internal forces are produced between the particles in the body as a reaction to external forces applied on the body.
Static Pressure
Static Pressure is the pressure at a nominated point in a fluid. Every point in a steadily flowing fluid, regardless of the fluid speed at that point, has its own static pressure P, dynamic pressure q, and total pressure P_0. The total pressure is the sum of the dynamic and static pressures, i.e. P_0 = P + q.
Mach Number
Dimensionless Ratio
ψ
Dimensionless
Strain
In any branch of science dealing with materials and their behaviour, strain is the geometrical expression of deformation caused by the action of stress on a physical body. Strain is calculated by first assuming a change between two body states: the beginning state and the final state. Then the difference in placement of two points in this body in those two states expresses the numerical value of strain. Strain therefore expresses itself as a change in size and/or shape. [Wikipedia]
U
Mole Fraction
In chemistry, the mole fraction of a component in a mixture is the relative proportion of molecules belonging to the component to those in the mixture, by number of molecules. It is one way of measuring concentration.
Compressibility Factor
The compressibility factor (Z) is a useful thermodynamic property for modifying the ideal gas law to account for the real gas behaviour. The closer a gas is to a phase change, the larger the deviations from ideal behavior. Values for compressibility are calculated using equations of state (EOS), such as the virial equation and van der Waals equation. The compressibility factor for specific gases can be obtained, with out calculation, from compressibility charts. These charts are created by plotting Z as a function of pressure at constant temperature.
Z
Reynolds Number
The Reynolds number (Re) is a dimensionless number defined as the ratio of inertial forces to viscous forces and, consequently, it quantifies the relative importance of these two types of forces for given flow conditions.
Heat Capacity Ratio
The heat capacity ratio, or ratio of specific heats, is the ratio of the heat capacity at constant pressure (C_P) to heat capacity at constant volume (C_V). For an ideal gas, the heat capacity is constant with temperature (Θ). Accordingly we can express the enthalpy as H = C_P*Θ and the internal energy as U = C_V*Θ. Thus, it can also be said that the heat capacity ratio is the ratio between enthalpy and internal energy
Thermal Efficiency
Thermal efficiency is a dimensionless performance measure of a thermal device such as an internal combustion engine, a boiler, or a furnace. The input to the device is heat, or the heat-content of a fuel that is consumed. The desired output is mechanical work, or heat, or possibly both.
Angle
Solid Angle
The solid angle subtended by a surface S is defined as the surface area of a unit sphere covered by the surface S's projection onto the sphere. A solid angle is related to the surface of a sphere in the same way an ordinary angle is related to the circumference of a circle. Since the total surface area of the unit sphere is 4*pi, the measure of solid angle will always be between 0 and 4*pi.
Plane Angle
The inclination to each other of two intersecting lines, measured by the arc of a circle intercepted between the two lines forming the angle, the center of the circle being the point of intersection. An acute angle is less than 90°; a right angle 90 °; an obtuse angle, more than 90° but less than 180 °; a straight angle, 180°; a reflex angle, more than 180° but less than 360°; a perigon, 360°. Any angle not a multiple of 90° is an oblique angle. If the sum of two angles is 90°, they are complementary angles; if 180°, supplementary angles; if 360°, explementary angles. Two adjacent angles have a common vertex and lie on opposite sides of a common side. A dihedral angle is the angle between two intersecting planes. A spherical angle is the angle between two intersecting great circles.
Gain
A general term used to denote an increase in signal power or signal strength in transmission from one point to another. Gain is usually expressed in decibels and is widely used to denote transducer gain. An increase or amplification. In radar there are two general usages of the term: (a) antenna gain, or gain factor, is the ratio of the power transmitted along the beam axis to that of an isotropic radiator transmitting the same total power; (b) receiver gain, or video gain, is the amplification given a signal by the receiver.
Mach number (Ma) is the speed of an object moving through air, or any fluid substance, divided by the speed of sound as it is in that substance:
M = V_o/V_s
where
M is the Mach number
V_o is the velocity of the object relative to the medium and
V_s is the velocity of sound in the medium
The Mach number is commonly used both with objects traveling at high speed in a fluid, and with high-speed fluid flows inside channels such as nozzles, diffusers or wind tunnels. As it is defined as a ratio of two speeds, it is a dimensionless number. [Wikipedia]
Kinematic Viscosity
Area per Time
Circulation
In fluid dynamics, circulation is the line integral around a closed curve of the fluid velocity. It has dimensions of length squared over time.
Γ
Thermal Diffusivity
The Kinematic Viscosity of a fluid is the dynamic viscosity divided by the fluid density.
Inverse Volume
Number Density
In physics, astronomy, and chemistry, number density (symbol: n) is a kind of quantity used to describe the degree of concentration of countable objects (atoms, molecules, dust particles, galaxies, etc.) in the three-dimensional physical space.
n
Specific Heat Volume
Specific heat per constant volume.
Power Area per Solid Angle
Length Molar Energy
Luminous Efficacy
Luminous Efficacy is the ratio of luminous flux (in lumens) to power (usually measured in watts). Depending on context, the power can be either the radiant flux of the source's output, or it can be the total electric power consumed by the source.
Force per Unit Length
Inverse Length
Power per Area Quartic Temperature
Gyromagnetic Ratio
Electric Charge per Mass
Exposure
γ
Inverse Magnetic Flux
Thermal Resistance
Molar Heat Capacity
Absolute Humidity
Density
Absolute humidity is the mass of water in a particular volume of air. It is a measure of the density of water vapor in an atmosphere.
Luminous Intensity
Luminous Intensity is a measure of the wavelength-weighted power emitted by a light source in a particular direction per unit solid angle. The weighting is determined by the luminosity function, a standardized model of the sensitivity of the human eye to different wavelengths.
J
Information Entropy
Speed
Speed is the magnitude of velocity.
Square Energy
Electric Current Density
Electric current density is a measure of the density of flow of electric charge; it is the electric current per unit area of cross section. Electric current density is a vector-valued quantity.
J
J
Inverse Energy
Angular Acceleration
Acceleration
Linear Acceleration
Acceleration is the (instantaneous) rate of change of velocity. Acceleration may be either linear acceleration, or angular acceleration. It is a vector quantity with dimension length/time^2 for linear acceleration, or in the case of angular acceleration, with dimension angle/time^2. In SI units, linear acceleration is measured in meters/second^2 (m·s^-2) and angular acceleration is measured in radians/second^2.
In common speech, the term acceleration is only used for an increase in speed. In physics, any increase or decrease in speed is referred to as acceleration and similarly, motion in a circle at constant speed is also an acceleration, since the direction component of the velocity is changing.
Angular acceleration is the rate of change of angular velocity over time. Measurement of the change made in the rate of change of an angle that a spinning object undergoes per unit time. It is a vector quantity. Also called Rotational acceleration.
In SI units, it is measured in radians per second squared (rad/s^2), and is usually denoted by the Greek letter alpha.
Absorbed Dose
Specific Energy
Dose Equivalent
The equivalent dose to a tissue is found by multiplying the absorbed dose, in gray, by a dimensionless "quality factor" Q, dependent upon radiation type, and by another dimensionless factor N, dependent on all other pertinent factors. N depends upon the part of the body irradiated, the time and volume over which the dose was spread, even the species of the subject.
Absorbed dose (also known as Total Ionizing Dose, TID) is a measure of the energy deposited in a medium by ionizing radiation. It is equal to the energy deposited per unit mass of medium, and so has the unit J/kg, which is given the special name Gray (Gy).
Note that the absorbed dose is not a good indicator of the likely biological effect. 1 Gy of alpha radiation would be much more biologically damaging than 1 Gy of photon radiation for example. Appropriate weighting factors can be applied reflecting the different relative biological effects to find the equivalent dose.
The risk of stoctic effects due to radiation exposure can be quantified using the effective dose, which is a weighted average of the equivalent dose to each organ depending upon its radiosensitivity. When ionising radiation is used to treat cancer, the doctor will usually prescribe the radiotherapy treatment in Gy. When risk from ionising radiation is being discussed, a related unit, the Sievert is used.
Specific Volume
Specific volume (ν) is the volume occupied by a unit of mass of a material. It is equal to the inverse of density.
ν
ν
Power Area
Temperature
Θ
Length Energy
Action
S
S
Electric Flux
The Electric Flux through an area is defined as the electric field multiplied by the area of the surface projected in a plane perpendicular to the field. Electric Flux is a scalar-valued quantity.
Radiant Flux
Power is the rate at which work is performed or energy is transmitted, or the amount of energy required or expended for a given unit of time. As a rate of change of work done or the energy of a subsystem, power is:
P = W/t
where P is power
W is work
t is time. [Wikipedia]
Heat Flow Rate
Power
Electric Power
Electric power is the rate at which electrical energy is transferred by an electric circuit. In the simple case of direct current circuits, electric power can be calculated as the product of the potential difference in the circuit (V) and the amount of current flowing in the circuit (I):
P = VI
where
P is the power
V is the potential difference
I is the current.
However, in general electric power is calculated by taking the integral of the vector cross-product of the electrical and magnetic fields over a specified area.
Radiant Flux, or radiant power, is the measure of the total power of electromagnetic radiation (including infrared, ultraviolet, and visible light). The power may be the total emitted from a source, or the total landing on a particular surface.
Φ
Video Frame Rate
Inverse Amount of Substance
Area Time Temperature
Thermal Resistivity
The reciprocal of thermal conductivity is thermal resistivity, measured in kelvin-metres per watt (K*m/W).
Mass Temperature
Currency
Asset
An Asset is an economic resource owned by a business or company. Simply stated, assets are things of value that can be readily converted into cash (although cash itself is also considered an asset).
Energy and Work per Mass Amount of Substance
Length Temperature
Data Rate
The frequency derived from the period of time required to transmit one bit. This represents the amount of data transferred per second by a communications channel or a computing or storage device. Data rate is measured in units of bits per second (written "b/s" or "bps"), bytes per second (Bps), or baud. When applied to data rate, the multiplier prefixes "kilo-", "mega-", "giga-", etc. (and their abbreviations, "k", "M", "G", etc.) always denote powers of 1000. For example, 64 kbps is 64,000 bits per second. This contrasts with units of storage which use different prefixes to denote multiplication by powers of 1024, e.g. 1 kibibit = 1024 bits.
Specific Impulse by Weight
Time
Time is a basic component of the measuring system used to sequence events, to compare the durations of events and the intervals between them, and to quantify the motions of objects.
T
Energy per Area Electric Charge
Capacitance
Capacitance is the ability of a body to hold an electrical charge; it is quantified as the amount of electric charge stored for a given electric potential. Capacitance is a scalar-valued quantity.
Gravitational Attraction
Electric Displacement Field
Electric Charge per Unit Area
Polarization Field
The Polarization Field is the vector field that expresses the density of permanent or induced electric dipole moments in a dielectric material. The polarization vector P is defined as the ratio of electric dipole moment per unit volume.
P
In a dielectric material the presence of an electric field E causes the bound charges in the material (atomic nuclei and their electrons) to slightly separate, inducing a local electric dipole moment. The Electric Displacement Field, D, is a vector field that accounts for the effects of free charges within such dielectric materials.
D
D
Radiance
Power per Area Angle
Radiance is a radiometric measure that describes the amount of light that passes through or is emitted from a particular area, and falls within a given solid angle in a specified direction.
Molar Mass
Mass per Area
Signal Detection Threshold
Magnetic Dipole Moment
The magnetic moment of a system is a measure of the magnitude and the direction of its magnetism. Magnetic moment usually refers to its Magnetic Dipole Moment, and quantifies the contribution of the system's internal magnetism to the external dipolar magnetic field produced by the system (that is, the component of the external magnetic field that is inversely proportional to the cube of the distance to the observer). The Magnetic Dipole Moment is a vector-valued quantity.
μ
Length
L
Capacity
In computer operations, (a) the largest quantity which can be stored, processed, or transferred; (b) the largest number of digits or characters which may regularly be processed; (c) the upper and lower limits of the quantities which may be processed.
In other contexts, the amount of material that can be stored, such as fuel or food.
TBD
Electric Current
Electric Current is the flow (movement) of electric charge. The amount of electric current through some surface, e.g., a section through a copper conductor, is defined as the amount of electric charge flowing through that surface over time. Current is a scalar-valued quantity.
I
Quantity kinds
Cubic Electric Dipole Moment per Square Energy
Coefficient of Heat Transfer
Temperature Amount of Substance
Linear Thermal Expansion
When the temperature of a substance changes, the energy that is stored in the intermolecular bonds between atoms changes. When the stored energy increases, so does the length of the molecular bonds. As a result, solids typically expand in response to heating and contract on cooling; this dimensional response to temperature change is expressed by its coefficient of thermal expansion.
Different coefficients of thermal expansion can be defined for a substance depending on whether the expansion is measured by:
* linear thermal expansion
* area thermal expansion
* volumetric thermal expansion
These characteristics are closely related. The volumetric thermal expansion coefficient can be defined for both liquids and solids. The linear thermal expansion can only be defined for solids, and is common in engineering applications.
Some substances expand when cooled, such as freezing water, so they have negative thermal expansion coefficients. [Wikipedia]
Resistance
The electrical resistance of an object is a measure of its opposition to the passage of a steady electric current.
R
Auxillary Magnetic Field
Electric Current per Unit Length
Magnetization Field
The Magnetization Field is defined as the ratio of magnetic moment per unit volume. It is a vector-valued quantity.
M
M
Magnetic Fields surround magnetic materials and electric currents and are detected by the force they exert on other magnetic materials and moving electric charges. The electric and magnetic fields are two interrelated aspects of a single object, called the electromagnetic field. A pure electric field in one reference frame is observed as a combination of both an electric field and a magnetic field in a moving reference frame. The Auxillary Magnetic Field, H characterizes how the true Magnetic Field B influences the organization of magnetic dipoles in a given medium.
H
Time Temperature
Electric Charge Line Density
Temperature per Magnetic Flux Density
Temperature per Time
Electric Field
Signal Strength
RF-Power
In telecommunications, particularly in radio, signal strength refers to the magnitude of the electric field at a reference point that is a significant distance from the transmitting antenna. It may also be referred to as received signal level or field strength. Typically, it is expressed in voltage per length or signal power received by a reference antenna. High-powered transmissions, such as those used in broadcasting, are expressed in dB-millivolts per metre (dBmV/m). [Wikipedia]
The space surrounding an electric charge or in the presence of a time-varying magnetic field has a property called an electric field. This electric field exerts a force on other electrically charged objects. In the idealized case, the force exerted between two point charges is inversely proportional to the square of the distance between them. (Coulomb's Law)
E
Viscosity
Dynamic Viscosity
μ
Molecular Viscosity
Viscosity is a measure of the resistance of a fluid which is being deformed by either shear stress or extensional stress. In general terms it is the resistance of a liquid to flow, or its "thickness". Viscosity describes a fluid's internal resistance to flow and may be thought of as a measure of fluid friction. [Wikipedia]
Polarizability
Polarizability is the relative tendency of a charge distribution, like the electron cloud of an atom or molecule, to be distorted from its normal shape by an external electric field, which may be caused by the presence of a nearby ion or dipole.
The electronic polarizability α is defined as the ratio of the induced dipole moment of an atom to the electric field that produces this dipole moment. Polarizability is often a scalar valued quantity, however in the general case it is tensor-valued.
α
Second Moment of Area
The second moment of area is a property of a physical object that can be used to predict its resistance to bending and deflection. The deflection of an object under load depends not only on the load, but also on the geometry of the object's cross-section.
Inverse Permittivity
Volume per Unit Time
Electric Dipole Moment
The Electric Dipole Moment is a measure of the separation of positive and negative electrical charges in a system of (discrete or continuous) charges. It is a vector-valued quantity. If the system of charges is neutral, that is if the sum of all charges is zero, then the dipole moment of the system is independent of the choice of a reference frame; however in a non-neutral system, such as the dipole moment of a single proton, a dependence on the choice of reference point arises. In such cases it is conventional to choose the reference point to be the center of mass of the system or the center of charge, not some arbitrary origin. This convention ensures that the dipole moment is an intrinsic property of the system.
Electric Charge per Amount of Substance
Inverse Length Temperature
Length per Unit Magnetic Flux
Magnetic Field
The Magnetic Field, denoted B, is a fundamental field in electrodynamics which characterizes the magnetic force exerted by electric currents. It is closely related to the auxillary magnetic field H (see quantity:AuxillaryMagneticField).
B
B
Power per Electric Charge
Force Magnitude
Tension
Tension is the magnitude of the pulling force exerted by a string, cable, chain, or similar object on another object. It is the opposite of compression.
Molar Energy
Energy per Area
Radiant Intensity
Radiant Intensity is a measure of the intensity of electromagnetic radiation. It is defined as power per unit solid angle.
Absorbed Dose Rate
Mass Amount of Substance Temperature
Weight
1. The force with which a body is attracted toward an astronomical body.
2. The product of the mass of a body and the acceleration acting on a body.
In a dynamic situation, the weight can be a multiple of that under resting conditions. Weight also varies on other planets in accordance with their gravity.
Mass Amount of Substance
Atomic Charge
Magnetomotive Force
Magnetomotive Force (mmf) is the ability of an electric circuit to produce magnetic flux. Just as the ability of a battery to produce electric current is called its electromotive force or emf, mmf is taken as the work required to move a unit magnet pole from any point through any path which links the electric circuit back the same point in the presence of the magnetic force produced by the electric current in the circuit.
Thermal Conductivity
Area Time
Mass per Electric Charge
Inverse Square Energy
Mass per Length
Quartic Electric Dipole Moment per Cubic Energy
Energy per Square Magnetic Flux Density
Heart Rate
Electric Charge
Electric charge is a fundamental conserved property of some subatomic particles, which determines their electromagnetic interaction. Electrically charged matter is influenced by, and produces, electromagnetic fields. The electric charge on a body may be positive or negative. Two positively charged bodies experience a mutual repulsive force, as do two negatively charged bodies. A positively charged body and a negatively charged body experience an attractive force.
Q
Volume Thermal Expansion
When the temperature of a substance changes, the energy that is stored in the intermolecular bonds between atoms changes. When the stored energy increases, so does the length of the molecular bonds. As a result, solids typically expand in response to heating and contract on cooling; this dimensional response to temperature change is expressed by its coefficient of thermal expansion.
Different coefficients of thermal expansion can be defined for a substance depending on whether the expansion is measured by:
* linear thermal expansion
* area thermal expansion
* volumetric thermal expansion
These characteristics are closely related. The volumetric thermal expansion coefficient can be defined for both liquids and solids. The linear thermal expansion can only be defined for solids, and is common in engineering applications.
Some substances expand when cooled, such as freezing water, so they have negative thermal expansion coefficients. [Wikipedia]
Permittivity
Permittivity is a physical quantity that describes how an electric field affects, and is affected by a dielectric medium, and is determined by the ability of a material to polarize in response to the field, and thereby reduce the total electric field inside the material. Permittivity is often a scalar valued quantity, however in the general case it is tensor-valued.
ε
2015-08-10T10:20:32.101Z
Luminous Energy
Luminous Energy is the perceived energy of light. This is sometimes also called the quantity of light.
Qv
Electric Charge Volume Density
ρ
Length per Unit Electric Current
Catalytic Activity
Electric Current per Angle
Molar Volume
V_m
Respiratory Rate
Curvature
The canonical example of extrinsic curvature is that of a circle, which has curvature equal to the inverse of its radius everywhere. Smaller circles bend more sharply, and hence have higher curvature. The curvature of a smooth curve is defined as the curvature of its osculating circle at each point. The osculating circle of a sufficiently smooth plane curve at a given point on the curve is the circle whose center lies on the inner normal line and whose curvature is the same as that of the given curve at that point. This circle is tangent to the curve at the given point.
That is, given a point P on a smooth curve C, the curvature of C at P is defined to be 1/R where R is the radius of the osculating circle of C at P. The magnitude of curvature at points on physical curves can be measured in diopters (also spelled dioptre) — this is the convention in optics. [Wikipedia]
Linear Energy Transfer
Luminance
Luminance is a photometric measure of the luminous intensity per unit area of light travelling in a given direction. It describes the amount of light that passes through or is emitted from a particular area, and falls within a given solid angle.
2
Amount of Substance
N
Inverse Time Temperature
Volumetric Heat Capacity
Turbidity
Turbidity is the cloudiness or haziness of a fluid, or of air, caused by individual particles (suspended solids) that are generally invisible to the naked eye, similar to smoke in air. Turbidity in open water is often caused by phytoplankton and the measurement of turbidity is a key test of water quality. The higher the turbidity, the higher the risk of the drinkers developing gastrointestinal diseases, especially for immune-compromised people, because contaminants like virus or bacteria can become attached to the suspended solid. The suspended solids interfere with water disinfection with chlorine because the particles act as shields for the virus and bacteria. Similarly suspended solids can protect bacteria from UV sterilisation of water. Fluids can contain suspended solid matter consisting of particles of many different sizes. While some suspended material will be large enough and heavy enough to settle rapidly to the bottom container if a liquid sample is left to stand (the settleable solids), very small particles will settle only very slowly or not at all if the sample is regularly agitated or the particles are colloidal. These small solid particles cause the liquid to appear turbid.
Mass per Area Time
qudt-quantity
Electric Quadrupole Moment
The Electric Quadrupole Moment is a quantity which describes the effective shape of the ellipsoid of nuclear charge distribution. A non-zero quadrupole moment Q indicates that the charge distribution is not spherically symmetric. By convention, the value of Q is taken to be positive if the ellipsoid is prolate and negative if it is oblate. In general, the electric quadrupole moment is tensor-valued.
Q
Length Force
Polar moment of inertia
The polar moment of inertia is a quantity used to predict an object's ability to resist torsion, in objects (or segments of objects) with an invariant circular cross-section and no significant warping or out-of-plane deformation. It is used to calculate the angular displacement of an object subjected to a torque. It is analogous to the area moment of inertia, which characterizes an object's ability to resist bending.
Standard Gravitational Parameter
μ
Force Per Area Time
Quantity kinds from QUDT v1.1
Magnetic Flux per Unit Length
1
AreaAngle
EnergyPerArea
1
Energy per Area
2015-08-10T10:20:31.932Z
Simon Cox
simon.cox@csiro.au
Simon Cox
simon.cox@csiro.au
Volumetric Heat Capacity
2015-08-10T10:20:31.958Z
1
VolumetricHeatCapacity
Pressure
2015-08-10T10:20:31.941Z
1
Simon Cox
simon.cox@csiro.au
Pressure
Time Temperature
Simon Cox
simon.cox@csiro.au
1
TimeTemperature
2015-08-10T10:20:32.036Z
2015-08-10T10:20:31.875Z
Heat
1
Simon Cox
simon.cox@csiro.au
Heat
1
Simon Cox
simon.cox@csiro.au
Magnetic Flux
MagneticFlux
2015-08-10T10:20:32.039Z
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.972Z
CatalyticActivity
Catalytic Activity
1
Polarizability
Polarizability
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.894Z
1
Heat Flow Rate per Unit Area
Simon Cox
simon.cox@csiro.au
HeatFlowRatePerUnitArea
1
2015-08-10T10:20:31.851Z
Radiance
Radiance
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:32.045Z
1
HeatCapacityRatio
Simon Cox
simon.cox@csiro.au
Heat Capacity Ratio
2015-08-10T10:20:32.028Z
1
1
Simon Cox
simon.cox@csiro.au
Concentration
2015-08-10T10:20:32.006Z
Concentration
1
ElectricDipoleMoment
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.808Z
Electric Dipole Moment
2015-08-10T10:20:32.044Z
Luminous Emmitance
1
LuminousEmmitance
Simon Cox
simon.cox@csiro.au
AngularFrequency
2015-08-10T10:20:31.876Z
Angular Frequency
Simon Cox
simon.cox@csiro.au
1
ThrustToMassRatio
Thrust to Mass Ratio
2015-08-10T10:20:31.887Z
1
Simon Cox
simon.cox@csiro.au
Simon Cox
simon.cox@csiro.au
1
GyromagneticRatio
Gyromagnetic Ratio
2015-08-10T10:20:32.024Z
1
Simon Cox
simon.cox@csiro.au
EnergyAndWorkPerMassAmountOfSubstance
2015-08-10T10:20:31.857Z
Energy and Work per Mass Amount of Substance
Simon Cox
simon.cox@csiro.au
InverseLength
1
2015-08-10T10:20:31.762Z
Inverse Length
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:32.031Z
ElectricField
Electric Field
1
1
2015-08-10T10:20:31.848Z
Luminous Energy
Simon Cox
simon.cox@csiro.au
LuminousEnergy
2015-08-10T10:20:31.789Z
ElectricChargeVolumeDensity
Simon Cox
simon.cox@csiro.au
Electric Charge Volume Density
1
LinearEnergyTransfer
Simon Cox
simon.cox@csiro.au
1
Linear Energy Transfer
2015-08-10T10:20:32.034Z
1
LinearAcceleration
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.999Z
Linear Acceleration
Capacitance
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.903Z
Capacitance
1
Simon Cox
simon.cox@csiro.au
1
Friction
2015-08-10T10:20:31.814Z
Friction
Heat Flow Rate
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.782Z
HeatFlowRate
1
1
2015-08-10T10:20:31.954Z
PolarMomentOfInertia
Polar moment of inertia
Simon Cox
simon.cox@csiro.au
1
Simon Cox
simon.cox@csiro.au
MicrobialFormation
Microbial Formation
2015-08-10T10:20:31.872Z
MassAmountOfSubstance
1
Mass Amount of Substance
2015-08-10T10:20:32.002Z
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.951Z
Simon Cox
simon.cox@csiro.au
EnergyPerAreaElectricCharge
Energy per Area Electric Charge
1
Kinetic Energy
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.823Z
1
KineticEnergy
Specific Impulse by Mass
1
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:32.011Z
SpecificImpulseByMass
Force per Electric Charge
2015-08-10T10:20:32.004Z
1
ForcePerElectricCharge
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.884Z
AmountOfSubstancePerUnitMass
1
Amount of substance per unit mass
Simon Cox
simon.cox@csiro.au
SpecificImpulseByWeight
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.957Z
Specific Impulse by Weight
1
Simon Cox
simon.cox@csiro.au
Enthalpy
2015-08-10T10:20:32.052Z
1
Enthalpy
Mass
Simon Cox
simon.cox@csiro.au
1
Mass
2015-08-10T10:20:31.975Z
Simon Cox
simon.cox@csiro.au
LuminousIntensity
Luminous Intensity
2015-08-10T10:20:31.898Z
1
Electric Power
ElectricPower
2015-08-10T10:20:32.008Z
1
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:32.032Z
LuminousFlux
Luminous Flux
Simon Cox
simon.cox@csiro.au
1
ElectricCharge
Electric Charge
2015-08-10T10:20:32.003Z
Simon Cox
simon.cox@csiro.au
1
Simon Cox
simon.cox@csiro.au
1
2015-08-10T10:20:31.9Z
MassPerTime
Mass per Time
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.776Z
1
Volume
Volume
2015-08-10T10:20:31.859Z
AbsoluteHumidity
1
Simon Cox
simon.cox@csiro.au
Absolute Humidity
Area
Area
1
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.892Z
SignalStrength
1
2015-08-10T10:20:31.775Z
Signal Strength
Simon Cox
simon.cox@csiro.au
1
2015-08-10T10:20:31.787Z
Simon Cox
simon.cox@csiro.au
ElectricCurrentDensity
Electric Current Density
SecondMomentOfArea
Second Moment of Area
2015-08-10T10:20:31.96Z
Simon Cox
simon.cox@csiro.au
1
ThermalEfficiency
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:32.041Z
Thermal Efficiency
1
MoleFraction
Mole Fraction
2015-08-10T10:20:31.864Z
1
Simon Cox
simon.cox@csiro.au
Kinematic Viscosity
1
2015-08-10T10:20:32.067Z
KinematicViscosity
Simon Cox
simon.cox@csiro.au
TemperaturePerTime
Temperature per Time
Simon Cox
simon.cox@csiro.au
1
2015-08-10T10:20:32.053Z
2015-08-10T10:20:31.838Z
NumberDensity
Simon Cox
simon.cox@csiro.au
Number Density
1
1
2015-08-10T10:20:31.923Z
FirstMomentOfArea
First Moment of Area
Simon Cox
simon.cox@csiro.au
Capacity
Simon Cox
simon.cox@csiro.au
1
Capacity
2015-08-10T10:20:32.026Z
1
Inverse Square Energy
2015-08-10T10:20:31.931Z
Simon Cox
simon.cox@csiro.au
InverseSquareEnergy
2015-08-10T10:20:31.985Z
Simon Cox
simon.cox@csiro.au
1
Length
Length
Simon Cox
simon.cox@csiro.au
1
QuarticElectricDipoleMomentPerCubicEnergy
2015-08-10T10:20:31.833Z
Quartic Electric Dipole Moment per Cubic Energy
EnergyPerTemperature
2015-08-10T10:20:31.87Z
Simon Cox
simon.cox@csiro.au
Energy per Temperature
1
2015-08-10T10:20:31.901Z
Atmospheric Pressure
1
Simon Cox
simon.cox@csiro.au
AtmosphericPressure
1
Mass per Area Time
Simon Cox
simon.cox@csiro.au
MassPerAreaTime
2015-08-10T10:20:31.847Z
1
Simon Cox
simon.cox@csiro.au
LengthEnergy
Length Energy
2015-08-10T10:20:31.768Z
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.824Z
RadiantIntensity
Radiant Intensity
1
2015-08-10T10:20:31.966Z
VolumePerUnitTime
Volume per Unit Time
Simon Cox
simon.cox@csiro.au
1
Simon Cox
simon.cox@csiro.au
Radiant Emmitance
1
RadiantEmmitance
2015-08-10T10:20:31.997Z
ThermalResistivity
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:32.021Z
Thermal Resistivity
1
Length Force
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.937Z
LengthByForce
1
Simon Cox
simon.cox@csiro.au
Power Area per Solid Angle
1
2015-08-10T10:20:32.04Z
PowerAreaPerSolidAngle
Simon Cox
simon.cox@csiro.au
Acceleration
1
2015-08-10T10:20:31.779Z
Acceleration
2015-08-10T10:20:31.887Z
1
Simon Cox
simon.cox@csiro.au
Radiosity
Radiosity
Curvature
2015-08-10T10:20:31.832Z
Simon Cox
simon.cox@csiro.au
1
Curvature
2015-08-10T10:20:31.786Z
Energy per Square Magnetic Flux Density
Simon Cox
simon.cox@csiro.au
EnergyPerSquareMagneticFluxDensity
1
Simon Cox
simon.cox@csiro.au
Strain
Strain
2015-08-10T10:20:32.007Z
1
1
Time
Time
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.883Z
Specific Heat Capacity
2015-08-10T10:20:31.882Z
SpecificHeatCapacity
1
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.871Z
Simon Cox
simon.cox@csiro.au
Exposure
1
Exposure
HeartRate
Heart Rate
Simon Cox
simon.cox@csiro.au
1
2015-08-10T10:20:32.093Z
1
2015-08-10T10:20:31.757Z
ForcePerLength
Simon Cox
simon.cox@csiro.au
Force per Unit Length
2015-08-10T10:20:31.902Z
InverseAmountOfSubstance
Simon Cox
simon.cox@csiro.au
Inverse Amount of Substance
1
Simon Cox
simon.cox@csiro.au
1
LinearVelocity
Linear Velocity
2015-08-10T10:20:32.073Z
Permittivity
1
Permittivity
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.784Z
1
Electric Current per Unit Energy
ElectricCurrentPerUnitEnergy
2015-08-10T10:20:31.991Z
Simon Cox
simon.cox@csiro.au
AmountOfSubstancePerUnitVolume
Amount of Substance Per Unit Volume
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.885Z
1
MolarHeatCapacity
Molar Heat Capacity
1
2015-08-10T10:20:31.983Z
Simon Cox
simon.cox@csiro.au
Area Time Temperature
2015-08-10T10:20:32.03Z
AreaTimeTemperature
1
Simon Cox
simon.cox@csiro.au
Force
Force
Simon Cox
simon.cox@csiro.au
1
2015-08-10T10:20:31.874Z
2015-08-10T10:20:31.765Z
Stress
Stress
Simon Cox
simon.cox@csiro.au
1
Simon Cox
simon.cox@csiro.au
1
2015-08-10T10:20:31.952Z
MagneticDipoleMoment
Magnetic Dipole Moment
1
StrainEnergyDensity
Simon Cox
simon.cox@csiro.au
Strain Energy Density
2015-08-10T10:20:31.791Z
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.865Z
1
CubicElectricDipoleMomentPerSquareEnergy
Cubic Electric Dipole Moment per Square Energy
Simon Cox
simon.cox@csiro.au
MassAmountOfSubstanceTemperature
1
2015-08-10T10:20:31.939Z
Mass Amount of Substance Temperature
2015-08-10T10:20:31.807Z
PowerPerAreaAngle
Simon Cox
simon.cox@csiro.au
1
Power per Area Angle
SpecificVolume
2015-08-10T10:20:31.896Z
Specific Volume
Simon Cox
simon.cox@csiro.au
1
1
Electric Current per Angle
ElectricCurrentPerAngle
2015-08-10T10:20:31.978Z
Simon Cox
simon.cox@csiro.au
Simon Cox
simon.cox@csiro.au
1
ReynoldsNumber
2015-08-10T10:20:31.935Z
Reynolds Number
Tension
1
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:32.037Z
Tension
EnergyKinetic
2015-08-10T10:20:32.009Z
Kinetic Energy
Simon Cox
simon.cox@csiro.au
1
Resistance
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:32.009Z
1
Resistance
2015-08-10T10:20:31.839Z
PlaneAngle
Simon Cox
simon.cox@csiro.au
Plane Angle
1
Simon Cox
simon.cox@csiro.au
Thermal Insulance
1
2015-08-10T10:20:32.066Z
ThermalInsulance
SpecificHeatPressure
2015-08-10T10:20:32.09Z
1
Specific Heat Pressure
Simon Cox
simon.cox@csiro.au
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.982Z
VideoFrameRate
1
Video Frame Rate
1
PolarizationField
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.984Z
Polarization Field
Inductance
Inductance
2015-08-10T10:20:31.89Z
Simon Cox
simon.cox@csiro.au
1
1
Simon Cox
simon.cox@csiro.au
Velocity
Velocity
2015-08-10T10:20:32.083Z
1
Simon Cox
simon.cox@csiro.au
SignalDetectionThreshold
Signal Detection Threshold
2015-08-10T10:20:31.769Z
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.89Z
1
PowerPerAreaQuarticTemperature
Power per Area Quartic Temperature
DynamicViscosity
2015-08-10T10:20:31.866Z
Dynamic Viscosity
1
Simon Cox
simon.cox@csiro.au
Power per Electric Charge
2015-08-10T10:20:31.944Z
PowerPerElectricCharge
1
Simon Cox
simon.cox@csiro.au
RadiantFlux
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.785Z
Radiant Flux
1
Static Pressure
StaticPressure
1
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.861Z
Area Thermal Expansion
Simon Cox
simon.cox@csiro.au
AreaThermalExpansion
2015-08-10T10:20:31.968Z
1
2015-08-10T10:20:31.84Z
Inverse Energy
1
Simon Cox
simon.cox@csiro.au
InverseEnergy
1
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.936Z
ElectricCurrentPerUnitLength
Electric Current per Unit Length
Torque
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.893Z
Torque
1
LinearMomentum
2015-08-10T10:20:31.955Z
Linear Momentum
Simon Cox
simon.cox@csiro.au
1
2015-08-10T10:20:31.767Z
Turbidity
1
Simon Cox
simon.cox@csiro.au
Turbidity
ElectricDisplacementField
Simon Cox
simon.cox@csiro.au
Electric Displacement Field
1
2015-08-10T10:20:31.925Z
Simon Cox
simon.cox@csiro.au
Absorbed Dose Rate
AbsorbedDoseRate
1
2015-08-10T10:20:31.808Z
Frequency
Simon Cox
simon.cox@csiro.au
Frequency
2015-08-10T10:20:31.932Z
1
2015-08-10T10:20:31.996Z
Mass per Area
Simon Cox
simon.cox@csiro.au
MassPerArea
1
1
Simon Cox
simon.cox@csiro.au
Density
Density
2015-08-10T10:20:31.852Z
2015-08-10T10:20:31.869Z
Action
Action
1
Simon Cox
simon.cox@csiro.au
ThermalConductivity
Simon Cox
simon.cox@csiro.au
Thermal Conductivity
1
2015-08-10T10:20:31.778Z
Simon Cox
simon.cox@csiro.au
1
MassPerLength
2015-08-10T10:20:31.995Z
Mass per Length
MolarEnergy
2015-08-10T10:20:31.841Z
Molar Energy
Simon Cox
simon.cox@csiro.au
1
2015-08-10T10:20:31.789Z
Thermal Energy Length
1
ThermalEnergyLength
Simon Cox
simon.cox@csiro.au
1
Amount of Substance
2015-08-10T10:20:32.068Z
Simon Cox
simon.cox@csiro.au
AmountOfSubstance
Simon Cox
simon.cox@csiro.au
Momentum
2015-08-10T10:20:31.948Z
1
Momentum
Force Per Area
1
2015-08-10T10:20:31.94Z
ForcePerArea
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.774Z
Simon Cox
simon.cox@csiro.au
Viscosity
1
Viscosity
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.83Z
1
Serum or Plasma Level
SerumOrPlasmaLevel
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.781Z
1
Mass per Electric Charge
MassPerElectricCharge
ElectricChargeLineDensity
Electric Charge Line Density
2015-08-10T10:20:32.055Z
Simon Cox
simon.cox@csiro.au
1
Area Temperature
AreaTemperature
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.942Z
1
2015-08-10T10:20:32.088Z
Simon Cox
simon.cox@csiro.au
CoefficientOfHeatTransfer
1
Coefficient of Heat Transfer
2015-08-10T10:20:32.1Z
Angular Momentum
AngularMomentum
Simon Cox
simon.cox@csiro.au
1
Simon Cox
simon.cox@csiro.au
1
Weight
2015-08-10T10:20:31.979Z
Weight
Simon Cox
simon.cox@csiro.au
1
2015-08-10T10:20:31.986Z
MagnetomotiveForce
Magnetomotive Force
2015-08-10T10:20:32.056Z
MolarMass
Simon Cox
simon.cox@csiro.au
Molar Mass
1
Power Area
2015-08-10T10:20:31.824Z
Simon Cox
simon.cox@csiro.au
PowerArea
1
ThermalDiffusivity
Simon Cox
simon.cox@csiro.au
1
2015-08-10T10:20:32.07Z
Thermal Diffusivity
1
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.813Z
Information Entropy
InformationEntropy
Internal Energy
EnergyInternal
1
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:32.023Z
Simon Cox
simon.cox@csiro.au
Asset
Asset
1
2015-08-10T10:20:32.029Z
1
AreaTime
2015-08-10T10:20:32.082Z
Area Time
Simon Cox
simon.cox@csiro.au
VolumeThermalExpansion
1
Volume Thermal Expansion
2015-08-10T10:20:32.099Z
Simon Cox
simon.cox@csiro.au
RespiratoryRate
Respiratory Rate
2015-08-10T10:20:31.967Z
1
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.962Z
1
Simon Cox
simon.cox@csiro.au
Area per Time
AreaPerTime
Simon Cox
simon.cox@csiro.au
ElectricFlux
Electric Flux
1
2015-08-10T10:20:31.899Z
qudt-quantity
2015-08-10T10:20:31.652Z
Simon Cox
simon.cox@csiro.au
1
Quantity kinds from QUDT v1.1
Quantity kinds
1
DryVolume
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.867Z
Dry Volume
Length per Unit Electric Current
1
Simon Cox
simon.cox@csiro.au
LengthPerUnitElectricCurrent
2015-08-10T10:20:31.849Z
Molar Volume
MolarVolume
2015-08-10T10:20:31.934Z
Simon Cox
simon.cox@csiro.au
1
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.926Z
1
Force Magnitude
ForceMagnitude
TemperatureAmountOfSubstance
1
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.968Z
Temperature Amount of Substance
2015-08-10T10:20:31.873Z
Simon Cox
simon.cox@csiro.au
1
Permeability
Permeability
Thermal Energy
Simon Cox
simon.cox@csiro.au
ThermalEnergy
1
2015-08-10T10:20:31.846Z
2015-08-10T10:20:31.976Z
1
MassTemperature
Simon Cox
simon.cox@csiro.au
Mass Temperature
1
ThermalResistance
Thermal Resistance
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:32.027Z
Simon Cox
simon.cox@csiro.au
Luminance
2015-08-10T10:20:31.78Z
Luminance
1
Compressibility Factor
1
2015-08-10T10:20:31.977Z
CompressibilityFactor
Simon Cox
simon.cox@csiro.au
ElectromotiveForce
1
2015-08-10T10:20:31.953Z
Electromotive Force
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.777Z
Simon Cox
simon.cox@csiro.au
Length Mass
LengthMass
1
Electric Quadrupole Moment
2015-08-10T10:20:31.945Z
ElectricQuadrupoleMoment
Simon Cox
simon.cox@csiro.au
1
1
Simon Cox
simon.cox@csiro.au
LinearThermalExpansion
Linear Thermal Expansion
2015-08-10T10:20:31.772Z
EnergyPerElectricCharge
2015-08-10T10:20:32.089Z
Simon Cox
simon.cox@csiro.au
Energy per Electric Charge
1
Molecular Mass
Simon Cox
simon.cox@csiro.au
MolecularMass
2015-08-10T10:20:32.005Z
1
Currency
Currency
Simon Cox
simon.cox@csiro.au
1
2015-08-10T10:20:32.071Z
2015-08-10T10:20:31.862Z
1
LuminousFluxPerArea
Simon Cox
simon.cox@csiro.au
Luminous Flux per Area
Length Temperature
1
Simon Cox
simon.cox@csiro.au
LengthTemperature
2015-08-10T10:20:31.863Z
1
Simon Cox
simon.cox@csiro.au
TemperaturePerMagneticFluxDensity
Temperature per Magnetic Flux Density
2015-08-10T10:20:31.904Z
HeatCapacity
Simon Cox
simon.cox@csiro.au
1
Heat Capacity
2015-08-10T10:20:31.813Z
1
Simon Cox
simon.cox@csiro.au
Moment of Inertia
MomentOfInertia
2015-08-10T10:20:31.771Z
Vorticity
Simon Cox
simon.cox@csiro.au
1
Vorticity
2015-08-10T10:20:31.763Z
Mach Number
2015-08-10T10:20:31.79Z
Simon Cox
simon.cox@csiro.au
MachNumber
1
Angular Acceleration
2015-08-10T10:20:31.805Z
AngularAcceleration
1
Simon Cox
simon.cox@csiro.au
1
2015-08-10T10:20:31.971Z
Simon Cox
simon.cox@csiro.au
Square Energy
SquareEnergy
1
2015-08-10T10:20:31.886Z
Gain
Simon Cox
simon.cox@csiro.au
Gain
Dose Equivalent
DoseEquivalent
2015-08-10T10:20:31.769Z
Simon Cox
simon.cox@csiro.au
1
Simon Cox
simon.cox@csiro.au
DynamicPressure
2015-08-10T10:20:31.949Z
Dynamic Pressure
1
SpecificHeatVolume
Simon Cox
simon.cox@csiro.au
1
2015-08-10T10:20:32.035Z
Specific Heat Volume
StochasticProcess
1
Simon Cox
simon.cox@csiro.au
Stochastic Process
2015-08-10T10:20:31.81Z
PowerPerArea
1
Power per Area
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.783Z
2015-08-10T10:20:31.963Z
Simon Cox
simon.cox@csiro.au
1
ThermodynamicTemperature
Temperature
1
Simon Cox
simon.cox@csiro.au
Electric Charge per Amount of Substance
ElectricChargePerAmountOfSubstance
2015-08-10T10:20:31.965Z
2015-08-10T10:20:32.069Z
Simon Cox
simon.cox@csiro.au
Illuminance
1
Illuminance
Molecular Viscosity
Simon Cox
simon.cox@csiro.au
1
MolecularViscosity
2015-08-10T10:20:31.895Z
2015-08-10T10:20:31.943Z
LengthTemperatureTime
Length Temperature Time
1
Simon Cox
simon.cox@csiro.au
1
Potential Energy
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.959Z
PotentialEnergy
Simon Cox
simon.cox@csiro.au
1
Dimensionless Ratio
DimensionlessRatio
2015-08-10T10:20:31.973Z
Dimensionless
Simon Cox
simon.cox@csiro.au
1
2015-08-10T10:20:32.091Z
Dimensionless
Time Squared
2015-08-10T10:20:31.811Z
Simon Cox
simon.cox@csiro.au
TimeSquared
1
2015-08-10T10:20:31.821Z
Electric Current
ElectricCurrent
1
Simon Cox
simon.cox@csiro.au
Simon Cox
simon.cox@csiro.au
Angle
2015-08-10T10:20:31.761Z
Angle
1
Energy and Work
1
2015-08-10T10:20:32.084Z
Simon Cox
simon.cox@csiro.au
EnergyAndWork
1
SolidAngle
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.964Z
Solid Angle
Speed
2015-08-10T10:20:31.888Z
Simon Cox
simon.cox@csiro.au
Speed
1
2015-08-10T10:20:31.897Z
MagnetizationField
1
Magnetization Field
Simon Cox
simon.cox@csiro.au
Simon Cox
simon.cox@csiro.au
1
2015-08-10T10:20:31.881Z
LengthMolarEnergy
Length Molar Energy
1
Simon Cox
simon.cox@csiro.au
Power
2015-08-10T10:20:31.98Z
Power
LengthPerUnitMagneticFlux
1
2015-08-10T10:20:31.961Z
Simon Cox
simon.cox@csiro.au
Length per Unit Magnetic Flux
Inverse Time Temperature
2015-08-10T10:20:32.092Z
Simon Cox
simon.cox@csiro.au
1
InverseTimeTemperature
2015-08-10T10:20:31.76Z
1
Circulation
Simon Cox
simon.cox@csiro.au
Circulation
1
StandardGravitationalParameter
Standard Gravitational Parameter
2015-08-10T10:20:31.878Z
Simon Cox
simon.cox@csiro.au
MagneticField
1
Magnetic Field
2015-08-10T10:20:32.038Z
Simon Cox
simon.cox@csiro.au
LiquidVolume
2015-08-10T10:20:31.771Z
Liquid Volume
1
Simon Cox
simon.cox@csiro.au
Simon Cox
simon.cox@csiro.au
InverseMagneticFlux
2015-08-10T10:20:31.93Z
1
Inverse Magnetic Flux
2015-08-10T10:20:32.042Z
Radiant Energy
RadiantEnergy
Simon Cox
simon.cox@csiro.au
1
1
LuminousEfficacy
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:32.025Z
Luminous Efficacy
1
2015-08-10T10:20:31.997Z
SpecificEnergy
Specific Energy
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.97Z
1
Angular Velocity
Simon Cox
simon.cox@csiro.au
AngularVelocity
Simon Cox
simon.cox@csiro.au
Thrust
Thrust
2015-08-10T10:20:31.946Z
1
2015-08-10T10:20:31.998Z
Energy Density
Simon Cox
simon.cox@csiro.au
EnergyDensity
1
2015-08-10T10:20:31.993Z
1
Simon Cox
simon.cox@csiro.au
Inverse Permittivity
InversePermittivity
Simon Cox
simon.cox@csiro.au
Electric Charge per Unit Area
2015-08-10T10:20:31.764Z
1
ElectricChargePerArea
ThermodynamicEntropy
Thermodynamic Entropy
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.812Z
1
2015-08-10T10:20:32.072Z
Simon Cox
simon.cox@csiro.au
Inverse Volume
1
InverseVolume
1
Simon Cox
simon.cox@csiro.au
ElectricChargePerMass
Electric Charge per Mass
2015-08-10T10:20:31.95Z
1
Molar Angular Momentum
2015-08-10T10:20:31.831Z
MolarAngularMomentum
Simon Cox
simon.cox@csiro.au
MagneticFluxPerUnitLength
2015-08-10T10:20:31.929Z
1
Simon Cox
simon.cox@csiro.au
Magnetic Flux per Unit Length
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.858Z
1
Irradiance
Irradiance
Gravitational Attraction
2015-08-10T10:20:32.03Z
GravitationalAttraction
1
Simon Cox
simon.cox@csiro.au
1
DataRate
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:32Z
Data Rate
Simon Cox
simon.cox@csiro.au
InverseLengthTemperature
2015-08-10T10:20:31.894Z
1
Inverse Length Temperature
ElectricConductivity
1
Simon Cox
simon.cox@csiro.au
Electric Conductivity
2015-08-10T10:20:31.85Z
1
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:32.054Z
AbsorbedDose
Absorbed Dose
1
RF-Power
2015-08-10T10:20:31.879Z
Simon Cox
simon.cox@csiro.au
RF-Power
Total Pressure
TotalPressure
1
2015-08-10T10:20:31.978Z
Simon Cox
simon.cox@csiro.au
2015-08-10T10:20:31.88Z
1
Activity
Activity
Simon Cox
simon.cox@csiro.au
1
Simon Cox
simon.cox@csiro.au
AtomicCharge
2015-08-10T10:20:31.861Z
Atomic Charge
1
ForcePerAreaTime
2015-08-10T10:20:31.992Z
Simon Cox
simon.cox@csiro.au
Force Per Area Time
2015-08-10T10:20:31.928Z
1
Auxillary Magnetic Field
Simon Cox
simon.cox@csiro.au
AuxillaryMagneticField
Simon Cox
simon.cox@csiro.au
ElectricPotential
2015-08-10T10:20:31.868Z
Electric Potential
1